FD60 fire doors in Epsom: what's involved
Looking for FD60 fire doors in Epsom? We supply and fit certified fire doors and components across Epsom and the wider Surrey area, working from a free survey and a fixed written quote.
Epsom has a broad mix of buildings, including small offices, schools and family homes after loft conversions, and the same fire door principles apply to all of them.
For FD60 work in Epsom we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Epsom buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
What you get:
- 60-minute glazing systems where vision panels are needed
- Check of the fire strategy rating for each opening
- Certified FD60 doorset or leaf with matching evidence
- Intumescent and smoke seals as specified
The regulations behind fire doors in Epsom
The rules that apply to fire doors in Epsom are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Epsom block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Epsom
You are most likely to need FD60 fire doors if you look after plant and boiler rooms, stair cores in taller blocks or mixed-use commercial buildings. Whatever the building in Epsom, we survey each opening and tell you which doors need work and which do not.
Our process in Epsom
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Epsom
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Epsom as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Epsom and nearby
We also cover towns near Epsom, including Ewell (2.6 km away), Banstead and Sutton. If your building is in KT17 or a neighbouring district, the service and pricing are the same.
Questions
Do you cover KT17 and nearby postcodes?
Yes. We cover Epsom including KT17, and nearby towns such as Ewell and Banstead. The survey and written quote are free.
Can you work from an existing inspection report for my Epsom building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.