FD30 fire doors in Epsom, done to the evidence
If you need FD30 fire doors in Epsom, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Epsom protect escape routes in light industrial buildings, schools and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Each FD30 leaf we supply for Epsom is sized for the opening, rather than trimmed beyond what its certification allows. In Epsom, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
On a typical job that means:
- Fire-tested hinges, latch or lock and intumescent pads
- Intumescent strips and smoke seals to the certification
- Overhead closer set to close and latch
- Certified FD30 or FD30S leaf, or full doorset
Which fire door rules apply in Epsom?
The rules that apply to fire doors in Epsom are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Epsom block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Epsom
Typical settings for FD30 fire doors include offices, care homes and HMOs. In Epsom, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Epsom installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Epsom
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Epsom as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Epsom and nearby
Nearby towns we cover include Ewell, Banstead and Sutton. Distance from Epsom does not change our guide prices, and the survey and quote are free.
Common questions
Is Epsom within your coverage area?
It is. We cover Epsom in Surrey and neighbouring towns such as Ewell. There is no charge for the survey.
How quickly can you survey in Epsom?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.