FD60 fire doors in Woking, done to the evidence
From the GU22 postcode district outwards, we take on FD60 fire doors across Woking for homes, blocks and workplaces.
Around Woking, purpose-built flats, converted period houses and industrial units all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Before ordering FD60 doors for a Woking building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Woking we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
Each installation includes:
- Check of the fire strategy rating for each opening
- Frame fixing and structural gap sealing recorded with photos
- 60-minute glazing systems where vision panels are needed
- Intumescent and smoke seals as specified
What the rules say for Woking
The rules that apply to fire doors in Woking are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Woking block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Woking need FD60 fire doors?
Landlords, managing agents, facilities teams and homeowners in Woking can all commission FD60 fire doors from us. The usual settings are plant and boiler rooms and stair cores in taller blocks, though single doors for refuse stores are just as welcome.
Our process in Woking
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Woking
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Woking
As well as Woking, we cover neighbouring towns including Guildford, Egham and Walton-on-Thames. The survey and quote are free.
Questions from Woking
Do you work in Woking?
Yes, we take on FD60 fire doors in Woking and the surrounding area, including Guildford and Egham. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Woking building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.