FD60 fire doors in Ipswich, done to the evidence
If you need FD60 fire doors in Ipswich, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Ipswich protect escape routes in purpose-built flats, industrial units and offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For FD60 work in Ipswich we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Ipswich buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
On a typical job that means:
- Load-rated hinges and correctly powered closer
- Frame fixing and structural gap sealing recorded with photos
- Check of the fire strategy rating for each opening
- Certified FD60 doorset or leaf with matching evidence
Fire door law for Ipswich properties
England's framework applies in Ipswich. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Ipswich, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Ipswich need FD60 fire doors?
You are most likely to need FD60 fire doors if you look after stair cores in taller blocks, plant and boiler rooms or refuse stores. Whatever the building in Ipswich, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Ipswich
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Ipswich building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Ipswich and neighbouring towns
As well as Ipswich, we cover neighbouring towns including Harwich, Felixstowe and Stowmarket. The survey and quote are free.
Questions from Ipswich
Is Ipswich within your coverage area?
It is. We cover Ipswich in Suffolk and neighbouring towns such as Harwich. There is no charge for the survey.
What happens on a survey in Ipswich?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.