FD60 fire doors in Haverhill, CB9

FD60 fire doors in Haverhill, done to the evidence

Our FD60 fire doors service covers Haverhill and the wider Suffolk area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Buildings in and around Haverhill range from houses with integral garages to family homes after loft conversions and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

For FD60 work in Haverhill we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Haverhill buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

What you get:

• 60-minute glazing systems where vision panels are needed
• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer

Rules and responsibilities in Haverhill

England's framework applies in Haverhill. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Haverhill, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Buildings and duty holders in Haverhill

From plant and boiler rooms to stair cores in taller blocks, the requirement for FD60 fire doors in Haverhill comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

From enquiry to handover in Haverhill

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Haverhill

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Haverhill building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from Haverhill

Neighbouring towns such as Newmarket, Sudbury, Braintree and Cambridge are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions