FD60 fire doors in Lowestoft, done to the evidence
If you need FD60 fire doors in Lowestoft, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Lowestoft protect escape routes in family homes after loft conversions, low-rise blocks of flats and industrial estates alike. We adapt the programme to the building and its occupants, never the standard of the installation.
FD60 openings in Lowestoft buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Lowestoft we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
Each installation includes:
- Check of the fire strategy rating for each opening
- Load-rated hinges and correctly powered closer
- Intumescent and smoke seals as specified
- 60-minute glazing systems where vision panels are needed
Fire door law for Lowestoft properties
In Lowestoft, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Lowestoft building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where FD60 fire doors fit in Lowestoft
You are most likely to need FD60 fire doors if you look after plant and boiler rooms, mixed-use commercial buildings or stair cores in taller blocks. Whatever the building in Lowestoft, we survey each opening and tell you which doors need work and which do not.
Our process in Lowestoft
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Lowestoft
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Lowestoft
Neighbouring towns such as Great Yarmouth, Norwich, Stowmarket and Ipswich are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Lowestoft?
Yes, we take on FD60 fire doors in Lowestoft and the surrounding area, including Great Yarmouth and Norwich. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.

