Fire door ironmongery for Ipswich buildings
Looking for fire door ironmongery in Ipswich? We supply and fit certified fire doors and components across Ipswich and the wider Suffolk area, working from a free survey and a fixed written quote.
Buildings in and around Ipswich range from offices to purpose-built flats and HMOs. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We supply ironmongery for Ipswich fire doors that matches each door's test evidence. Signage for fire doors in Ipswich buildings is fitted as part of the job, not as an afterthought.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
What you get:
- Fire-rated hinges, commonly grade 13
- Fire door signage
- Lever handles, pull handles and push plates
- Intumescent pads and lock linings
Fire door law for Ipswich properties
The rules that apply to fire doors in Ipswich are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Ipswich block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Ipswich
Landlords, managing agents, facilities teams and homeowners in Ipswich can all commission fire door ironmongery from us. The usual settings are hotels and blocks of flats, though single doors for offices are just as welcome.
How a Ipswich job runs
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Ipswich?
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Ipswich building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Ipswich and neighbouring towns
As well as Ipswich, we cover neighbouring towns including Harwich, Felixstowe and Stowmarket. The survey and quote are free.
Common questions
Is Ipswich within your coverage area?
It is. We cover Ipswich in Suffolk and neighbouring towns such as Harwich. There is no charge for the survey.
What happens on a survey in Ipswich?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.