FD60 fire doors across Suffolk

What FD60 fire doors in Suffolk should include

Whether your building is in Ipswich, Lowestoft or a smaller place in Suffolk, we can provide FD60 fire doors with the same evidence-led approach.

FD60 openings in Suffolk buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Suffolk building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.

Managing agents, landlords, schools, care providers, businesses and homeowners in Suffolk can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

Rules and responsibilities in Suffolk

In Suffolk, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Suffolk building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

From enquiry to handover in Suffolk

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Suffolk?

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Suffolk as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Questions