FD60 fire doors for Newcastle-under-Lyme buildings
If you need FD60 fire doors in Newcastle-under-Lyme, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Newcastle-under-Lyme protect escape routes in HMOs, care homes and GP surgeries alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For FD60 work in Newcastle-under-Lyme we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Newcastle-under-Lyme buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
On a typical job that means:
- Intumescent and smoke seals as specified
- Check of the fire strategy rating for each opening
- 60-minute glazing systems where vision panels are needed
- Load-rated hinges and correctly powered closer
The regulations behind fire doors in Newcastle-under-Lyme
England's framework applies in Newcastle-under-Lyme. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Newcastle-under-Lyme, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs FD60 fire doors in Newcastle-under-Lyme?
You are most likely to need FD60 fire doors if you look after stair cores in taller blocks, plant and boiler rooms or mixed-use commercial buildings. Whatever the building in Newcastle-under-Lyme, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Newcastle-under-Lyme
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Newcastle-under-Lyme
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Newcastle-under-Lyme building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Newcastle-under-Lyme
Neighbouring towns such as Stoke-on-Trent, Longton, Kidsgrove and Crewe are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Newcastle-under-Lyme
Do you cover ST5 and nearby postcodes?
Yes. We cover Newcastle-under-Lyme including ST5, and nearby towns such as Stoke-on-Trent and Longton. The survey and written quote are free.
Can you work from an existing inspection report for my Newcastle-under-Lyme building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.