FD60 fire doors: our service in Rugeley
Our FD60 fire doors service in Rugeley is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
In and around Rugeley, fire door work covers everything from care homes to family homes after loft conversions. We plan each job around the people who use the building.
Before ordering FD60 doors for a Rugeley building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Rugeley we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
What you get:
- Intumescent and smoke seals as specified
- Load-rated hinges and correctly powered closer
- 60-minute glazing systems where vision panels are needed
- Check of the fire strategy rating for each opening
The regulations behind fire doors in Rugeley
England's framework applies in Rugeley. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Rugeley, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where FD60 fire doors fit in Rugeley
Landlords, managing agents, facilities teams and homeowners in Rugeley can all commission FD60 fire doors from us. The usual settings are plant and boiler rooms and refuse stores, though single doors for mixed-use commercial buildings are just as welcome.
How a Rugeley job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Rugeley?
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Rugeley and neighbouring towns
Neighbouring towns such as Burntwood, Cannock, Lichfield and Stafford are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Rugeley within your coverage area?
It is. We cover Rugeley in Staffordshire and neighbouring towns such as Burntwood. There is no charge for the survey.
How quickly can you survey in Rugeley?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.