FD60 fire doors in Crewe

FD60 fire doors in Crewe: what's involved

From the CW1 postcode district outwards, we take on FD60 fire doors across Crewe for homes, blocks and workplaces.

Buildings in and around Crewe range from low-rise blocks of flats to HMOs and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

FD60 openings in Crewe buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Crewe we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

On a typical job that means:

• Frame fixing and structural gap sealing recorded with photos
• Certified FD60 doorset or leaf with matching evidence
• 60-minute glazing systems where vision panels are needed
• Intumescent and smoke seals as specified

Fire door law for Crewe properties

England's framework applies in Crewe. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Crewe, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD60 fire doors fit in Crewe

The need for FD60 fire doors usually arises in mixed-use commercial buildings or plant and boiler rooms, and sometimes refuse stores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Crewe to keep escape routes protected throughout.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Crewe

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Crewe building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Nearby areas we cover from Crewe

We also cover towns near Crewe, including Winsford (11.8 km away), Kidsgrove and Congleton. If your building is in CW1 or a neighbouring district, the service and pricing are the same.

Common questions