Riser and cupboard fire doors in New Malden: what's involved
For property owners, landlords and managing agents in New Malden, we offer riser and cupboard fire doors with one team for the survey, the product and the installation.
Around New Malden, restaurants, clinics and purpose-built blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Riser and meter cupboard doors in New Malden blocks are easy to overlook until an inspection flags them. We match riser doors in New Malden to the rating of the riser enclosure, not to whatever was there before.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
On a typical job that means:
- Single and double flush configurations
- Locks and keep-locked arrangements as specified
- Seals and frame gap sealing
- Signage as required
Rules and responsibilities in New Malden
Fire doors in New Malden fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. Enforcement of fire safety law in New Malden sits with the London Fire Brigade.
For residential buildings in New Malden above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in New Malden
You are most likely to need riser and cupboard fire doors if you look after hotels, student accommodation or blocks of flats. Whatever the building in New Malden, we survey each opening and tell you which doors need work and which do not.
The steps on a New Malden installation
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
What does riser and cupboard fire doors cost in New Malden?
Guide pricing for riser and cupboard fire doors: £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. Volume work across several doors in one New Malden building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering New Malden and nearby
Nearby towns we cover include Surbiton, Morden and Wimbledon. Distance from New Malden does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover KT3 and nearby postcodes?
Yes. We cover New Malden including KT3, and nearby towns such as Surbiton and Morden. The survey and written quote are free.
Can you work from an existing inspection report for my New Malden building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.
Do you fix fire stopping inside risers?
Fire stopping is a separate specialist trade. We record anything we see while fitting doors and can coordinate with your fire stopping contractor.