Getting FD60 fire doors right in Essex
Our FD60 fire doors service runs throughout Essex. Main towns include Southend-on-Sea, Basildon and Colchester, and we cover the smaller places in between.
FD60 openings in Essex buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Essex building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
Managing agents, landlords, schools, care providers, businesses and homeowners in Essex can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
The regulations behind fire doors in Essex
The rules that apply to fire doors in Essex are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Essex block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
The steps on a Essex installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Essex
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Essex building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
FD60 fire doors questions
Do you provide FD60 fire doors across Essex?
Yes. We cover all of Essex, including Southend-on-Sea and Basildon. Surveys and written quotes are free.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.