FD60 fire doors in Brentwood

FD60 fire doors in Brentwood: what's involved

For property owners, landlords and managing agents in Brentwood, we offer FD60 fire doors with one team for the survey, the product and the installation.

In and around Brentwood, fire door work covers everything from care homes to houses with integral garages. We plan each job around the people who use the building.

FD60 openings in Brentwood buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Brentwood we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Intumescent and smoke seals as specified
• 60-minute glazing systems where vision panels are needed
• Check of the fire strategy rating for each opening
• Frame fixing and structural gap sealing recorded with photos

Fire door law for Brentwood properties

Fire doors in Brentwood fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Brentwood above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Brentwood

The need for FD60 fire doors usually arises in stair cores in taller blocks or mixed-use commercial buildings, and sometimes refuse stores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Brentwood to keep escape routes protected throughout.

From enquiry to handover in Brentwood

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Brentwood

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Brentwood building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Brentwood and neighbouring towns

We also cover towns near Brentwood, including Billericay (7.9 km away), Hornchurch and Romford. If your building is in CM14 or a neighbouring district, the service and pricing are the same.

Common questions