FD60 fire doors in Heavitree

FD60 fire doors in Heavitree: what's involved

For property owners, landlords and managing agents in Heavitree, we offer FD60 fire doors with one team for the survey, the product and the installation.

Heavitree has a broad mix of buildings, including light industrial buildings, houses with integral garages and schools, and the same fire door principles apply to all of them.

Before ordering FD60 doors for a Heavitree building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Heavitree we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

What you get:

• 60-minute glazing systems where vision panels are needed
• Frame fixing and structural gap sealing recorded with photos
• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening

The regulations behind fire doors in Heavitree

England's framework applies in Heavitree. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Heavitree, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Buildings and duty holders in Heavitree

Typical settings for FD60 fire doors include mixed-use commercial buildings, plant and boiler rooms and refuse stores. In Heavitree, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Budgeting for FD60 fire doors in Heavitree

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Heavitree as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Around Heavitree

We also cover towns near Heavitree, including Exeter (2.2 km away), Exmouth and Tiverton. If your building is in EX1 or a neighbouring district, the service and pricing are the same.

Common questions