FD60 fire doors in Plymouth

Getting FD60 fire doors right in Plymouth

Looking for FD60 fire doors in Plymouth? We supply and fit certified fire doors and components across Plymouth and the wider Devon area, working from a free survey and a fixed written quote.

Fire doors in Plymouth protect escape routes in student accommodation, hotels and clinics alike. We adapt the programme to the building and its occupants, never the standard of the installation.

FD60 openings in Plymouth buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Plymouth we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

Each installation includes:

• Intumescent and smoke seals as specified
• Check of the fire strategy rating for each opening
• 60-minute glazing systems where vision panels are needed
• Certified FD60 doorset or leaf with matching evidence

Which fire door rules apply in Plymouth?

Fire doors in Plymouth fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Plymouth above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Which buildings in Plymouth need FD60 fire doors?

You are most likely to need FD60 fire doors if you look after refuse stores, mixed-use commercial buildings or stair cores in taller blocks. Whatever the building in Plymouth, we survey each opening and tell you which doors need work and which do not.

How a Plymouth job runs

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Plymouth?

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Plymouth building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from Plymouth

As well as Plymouth, we cover neighbouring towns including Plymstock, Paignton and Newton Abbot. The survey and quote are free.

Common questions