FD60 fire doors in Paignton

FD60 fire doors in Paignton: what's involved

We provide FD60 fire doors in Paignton (TQ3 and the surrounding postcodes), from the first survey through to a documented handover.

In and around Paignton, fire door work covers everything from HMOs to high-street shops. We plan each job around the people who use the building.

FD60 openings in Paignton buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Paignton we generally fit certified doorsets, so frame and leaf share the same test evidence.

What do you hand over at the end?

For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.

What you get:

• Check of the fire strategy rating for each opening
• Load-rated hinges and correctly powered closer
• 60-minute glazing systems where vision panels are needed
• Certified FD60 doorset or leaf with matching evidence

Fire door law for Paignton properties

In Paignton, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Paignton building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Which buildings in Paignton need FD60 fire doors?

Typical settings for FD60 fire doors include plant and boiler rooms, stair cores in taller blocks and mixed-use commercial buildings. In Paignton, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

From enquiry to handover in Paignton

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Paignton?

As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Paignton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Covering Paignton and nearby

We also cover towns near Paignton, including Torquay (4.2 km away), Newton Abbot and Exmouth. If your building is in TQ3 or a neighbouring district, the service and pricing are the same.

Questions from Paignton