FD30 fire doors in Wallsend, done to the evidence
We provide FD30 fire doors in Wallsend (NE28 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Wallsend protect escape routes in small blocks of flats, care homes and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Each FD30 leaf we supply for Wallsend is sized for the opening, rather than trimmed beyond what its certification allows. In Wallsend, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
What you get:
- Frame-to-wall gap sealed with an evidenced material
- Photo record, product data and certificate references at handover
- Intumescent strips and smoke seals to the certification
- Overhead closer set to close and latch
Rules and responsibilities in Wallsend
England's framework applies in Wallsend. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Wallsend, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where FD30 fire doors fit in Wallsend
Typical settings for FD30 fire doors include blocks of flats, care homes and schools. In Wallsend, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Wallsend installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Wallsend
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Wallsend building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Wallsend and neighbouring towns
Nearby towns we cover include Hebburn, Jarrow and Felling. Distance from Wallsend does not change our guide prices, and the survey and quote are free.
Questions
Do you work in Wallsend?
Yes, we take on FD30 fire doors in Wallsend and the surrounding area, including Hebburn and Jarrow. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.

