Getting fire door frames right in Wallsend
Looking for fire door frames in Wallsend? We supply and fit certified fire doors and components across Wallsend and the wider Tyne and Wear area, working from a free survey and a fixed written quote.
In and around Wallsend, fire door work covers everything from light industrial buildings to care homes. We plan each job around the people who use the building.
Frame-to-wall gaps on Wallsend jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Wallsend survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Photographs of fixing and sealing before covering
- Assessment of frame condition and compatibility
- Hardwood or certified frames to suit the door
- Frame-to-wall gap sealing with evidenced materials
Fire door law for Wallsend properties
England's framework applies in Wallsend. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Wallsend, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Wallsend need fire door frames?
The need for fire door frames usually arises in schools or converted houses, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Wallsend to keep escape routes protected throughout.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Wallsend
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Wallsend building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Wallsend
We also cover towns near Wallsend, including Hebburn (2.3 km away), Jarrow and Felling. If your building is in NE28 or a neighbouring district, the service and pricing are the same.
Questions from Wallsend
Is Wallsend within your coverage area?
It is. We cover Wallsend in Tyne and Wear and neighbouring towns such as Hebburn. There is no charge for the survey.
What happens on a survey in Wallsend?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.