FD30 fire doors in Newcastle upon Tyne

FD30 fire doors: our service in Newcastle upon Tyne

For property owners, landlords and managing agents in Newcastle upon Tyne, we offer FD30 fire doors with one team for the survey, the product and the installation.

Buildings in and around Newcastle upon Tyne range from purpose-built blocks of flats to mixed-use office buildings and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Each FD30 leaf we supply for Newcastle upon Tyne is sized for the opening, rather than trimmed beyond what its certification allows. In Newcastle upon Tyne, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

Each installation includes:

• Fire-tested hinges, latch or lock and intumescent pads
• Survey of the opening, frame and existing ironmongery
• Frame-to-wall gap sealed with an evidenced material
• Overhead closer set to close and latch

Which fire door rules apply in Newcastle upon Tyne?

England's framework applies in Newcastle upon Tyne. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Newcastle upon Tyne, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD30 fire doors fit in Newcastle upon Tyne

From schools to shops, the requirement for FD30 fire doors in Newcastle upon Tyne comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

How a Newcastle upon Tyne job runs

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Newcastle upon Tyne

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Newcastle upon Tyne building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Newcastle upon Tyne

Beyond Newcastle upon Tyne itself we also cover nearby towns such as Gateshead (1.5 km), Gosforth and Felling. The service, pricing and evidence are the same wherever you are.

Questions from Newcastle upon Tyne