What FD30 fire doors in Tonypandy should include
Our FD30 fire doors service in Tonypandy is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Tonypandy range from houses with integral garages to family homes after loft conversions and industrial estates. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Each FD30 leaf we supply for Tonypandy is sized for the opening, rather than trimmed beyond what its certification allows. In Tonypandy, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
As standard, the work covers:
- Certified FD30 or FD30S leaf, or full doorset
- Photo record, product data and certificate references at handover
- Survey of the opening, frame and existing ironmongery
- Fire-tested hinges, latch or lock and intumescent pads
The regulations behind fire doors in Tonypandy
Because Tonypandy is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.
England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Tonypandy comes from your fire risk assessment.
Where FD30 fire doors fit in Tonypandy
Landlords, managing agents, facilities teams and homeowners in Tonypandy can all commission FD30 fire doors from us. The usual settings are offices and schools, though single doors for care homes are just as welcome.
The steps on a Tonypandy installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Tonypandy?
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Tonypandy building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Tonypandy
Tonypandy is about 4.1 km from Rhondda, and we cover both, along with nearby Pontypridd and Aberdare. Send us your postcode and we'll confirm survey dates.
Questions
Is Tonypandy within your coverage area?
It is. We cover Tonypandy in Mid Glamorgan and neighbouring towns such as Rhondda. There is no charge for the survey.
Can you work from an existing inspection report for my Tonypandy building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.