FD30 fire doors in Aberdare

FD30 fire doors: our service in Aberdare

When you book FD30 fire doors in Aberdare, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Aberdare has a broad mix of buildings, including schools, small blocks of flats and care homes, and the same fire door principles apply to all of them.

In Aberdare, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Aberdare, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

What you get:

• Photo record, product data and certificate references at handover
• Survey of the opening, frame and existing ironmongery
• Intumescent strips and smoke seals to the certification
• Overhead closer set to close and latch

Fire door law for Aberdare properties

Because Aberdare is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.

England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Aberdare comes from your fire risk assessment.

Buildings and duty holders in Aberdare

The need for FD30 fire doors usually arises in care homes or offices, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Aberdare to keep escape routes protected throughout.

Our process in Aberdare

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Aberdare

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Aberdare building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Aberdare and neighbouring towns

Neighbouring towns such as Rhondda, Merthyr Tydfil, Tonypandy and Pontypridd are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions