Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

FD30 fire door installation in Rhondda

The everyday 30-minute fire door, supplied as a leaf or full doorset and fitted to its evidence. Covering Rhondda and CF43, with a free survey and fixed written quote.

Quote in Rhondda

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

FD30 fire doors: our service in Rhondda

When you book FD30 fire doors in Rhondda, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Buildings in and around Rhondda range from schools to high-street shops and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Each FD30 leaf we supply for Rhondda is sized for the opening, rather than trimmed beyond what its certification allows. In Rhondda, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

What you get:

  • Certified FD30 or FD30S leaf, or full doorset
  • Overhead closer set to close and latch
  • Photo record, product data and certificate references at handover
  • Frame-to-wall gap sealed with an evidenced material

Rules and responsibilities in Rhondda

Because Rhondda is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.

England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Rhondda comes from your fire risk assessment.

Buildings and duty holders in Rhondda

The need for FD30 fire doors usually arises in HMOs or schools, and sometimes shops. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Rhondda to keep escape routes protected throughout.

What happens after you enquire

  1. Measure the opening, check the frame and confirm the rating needed
  2. Order a certified leaf or doorset to size, with matching components
  3. Remove the old door and assess the frame or structural opening
  4. Fix the frame and hang the leaf to the certified gap tolerances
  5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
  6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Rhondda

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Around Rhondda

As well as Rhondda, we cover neighbouring towns including Tonypandy, Aberdare and Pontypridd. The survey and quote are free.

Common questions

Is Rhondda within your coverage area?

It is. We cover Rhondda in Mid Glamorgan and neighbouring towns such as Tonypandy. There is no charge for the survey.

What happens on a survey in Rhondda?

We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.

What is the difference between FD30 and FD30S?

FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.

Can a new FD30 door go into my old frame?

Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.

More FD30 fire doors in Mid Glamorgan

Book a free survey in Rhondda

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote