FD30 fire doors for Hertford buildings
For property owners, landlords and managing agents in Hertford, we offer FD30 fire doors with one team for the survey, the product and the installation.
Fire doors in Hertford protect escape routes in small offices, small blocks of flats and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In Hertford, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Hertford, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
What you get:
- Certified FD30 or FD30S leaf, or full doorset
- Survey of the opening, frame and existing ironmongery
- Intumescent strips and smoke seals to the certification
- Fire-tested hinges, latch or lock and intumescent pads
Rules and responsibilities in Hertford
The rules that apply to fire doors in Hertford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Hertford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs FD30 fire doors in Hertford?
You are most likely to need FD30 fire doors if you look after schools, offices or care homes. Whatever the building in Hertford, we survey each opening and tell you which doors need work and which do not.
Our process in Hertford
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Hertford
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Hertford building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Hertford
Neighbouring towns such as Hoddesdon, Welwyn Garden City, Hatfield and Cheshunt are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you cover SG13 and nearby postcodes?
Yes. We cover Hertford including SG13, and nearby towns such as Hoddesdon and Welwyn Garden City. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.