FD30 fire doors in Berkhamsted: what's involved
When you book FD30 fire doors in Berkhamsted, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
In and around Berkhamsted, fire door work covers everything from care homes to houses with integral garages. We plan each job around the people who use the building.
In Berkhamsted, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Berkhamsted, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
As standard, the work covers:
- Certified FD30 or FD30S leaf, or full doorset
- Survey of the opening, frame and existing ironmongery
- Overhead closer set to close and latch
- Photo record, product data and certificate references at handover
Fire door law for Berkhamsted properties
England's framework applies in Berkhamsted. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Berkhamsted, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Berkhamsted need FD30 fire doors?
Typical settings for FD30 fire doors include schools, HMOs and care homes. In Berkhamsted, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Berkhamsted
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Berkhamsted as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Berkhamsted
We also cover towns near Berkhamsted, including Chesham (7.1 km away), Hemel Hempstead and Amersham. If your building is in HP4 or a neighbouring district, the service and pricing are the same.
Common questions
Is Berkhamsted within your coverage area?
It is. We cover Berkhamsted in Hertfordshire and neighbouring towns such as Chesham. There is no charge for the survey.
Can you work from an existing inspection report for my Berkhamsted building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.