FD60 fire doors in Hertford, SG13

FD60 fire doors: our service in Hertford

Looking for FD60 fire doors in Hertford? We supply and fit certified fire doors and components across Hertford and the wider Hertfordshire area, working from a free survey and a fixed written quote.

Buildings in and around Hertford range from care homes to light industrial buildings and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

For FD60 work in Hertford we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Hertford buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Intumescent and smoke seals as specified
• Check of the fire strategy rating for each opening
• Load-rated hinges and correctly powered closer
• 60-minute glazing systems where vision panels are needed

The regulations behind fire doors in Hertford

The rules that apply to fire doors in Hertford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Hertford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Which buildings in Hertford need FD60 fire doors?

Typical settings for FD60 fire doors include plant and boiler rooms, stair cores in taller blocks and refuse stores. In Hertford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Hertford?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Hertford

Nearby towns we cover include Hoddesdon, Welwyn Garden City and Hatfield. Distance from Hertford does not change our guide prices, and the survey and quote are free.

Questions from Hertford