FD30 fire doors in Peterborough, done to the evidence
Our FD30 fire doors service covers Peterborough and the wider Cambridgeshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
In and around Peterborough, fire door work covers everything from offices to GP surgeries. We plan each job around the people who use the building.
In Peterborough, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Peterborough, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
What you get:
- Fire-tested hinges, latch or lock and intumescent pads
- Overhead closer set to close and latch
- Frame-to-wall gap sealed with an evidenced material
- Photo record, product data and certificate references at handover
Rules and responsibilities in Peterborough
In Peterborough, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Peterborough building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Peterborough need FD30 fire doors?
The need for FD30 fire doors usually arises in care homes or shops, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Peterborough to keep escape routes protected throughout.
From enquiry to handover in Peterborough
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Peterborough
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Peterborough building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Peterborough and nearby
Beyond Peterborough itself we also cover nearby towns such as Stamford (18.0 km), March and Spalding. The service, pricing and evidence are the same wherever you are.
Common questions
Do you work in Peterborough?
Yes, we take on FD30 fire doors in Peterborough and the surrounding area, including Stamford and March. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Peterborough?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.

