Riser and cupboard fire doors in Ashford (Kent), done to the evidence
We provide riser and cupboard fire doors in Ashford (Kent) (TN24 and the surrounding postcodes), from the first survey through to a documented handover.
Ashford (Kent) has a broad mix of buildings, including industrial estates, family homes after loft conversions and schools, and the same fire door principles apply to all of them.
Riser and meter cupboard doors in Ashford (Kent) blocks are easy to overlook until an inspection flags them. We match riser doors in Ashford (Kent) to the rating of the riser enclosure, not to whatever was there before.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
On a typical job that means:
- Locks and keep-locked arrangements as specified
- Seals and frame gap sealing
- Single and double flush configurations
- Signage as required
The regulations behind fire doors in Ashford (Kent)
In Ashford (Kent), as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Ashford (Kent) building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs riser and cupboard fire doors in Ashford (Kent)?
Landlords, managing agents, facilities teams and homeowners in Ashford (Kent) can all commission riser and cupboard fire doors from us. The usual settings are office buildings and blocks of flats, though single doors for hotels are just as welcome.
Our process in Ashford (Kent)
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Guide prices in Ashford (Kent)
As a guide, budget £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. The figure for your Ashford (Kent) building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Ashford (Kent) and nearby
We also cover towns near Ashford (Kent), including Faversham (18.7 km away), Canterbury and Folkestone. If your building is in TN24 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Ashford (Kent)?
Yes, we take on riser and cupboard fire doors in Ashford (Kent) and the surrounding area, including Faversham and Canterbury. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Ashford (Kent)?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.