Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Intumescent strip and smoke seal fitting in Shropshire

Replacing and fitting intumescent strips, smoke seals and pads to the door's certification. Available throughout Shropshire, with a free survey and fixed written quote.

Quote for Shropshire

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Intumescent strips and smoke seals in Shropshire, done to the evidence

For intumescent strips and smoke seals anywhere in Shropshire, one team handles the survey, supply, installation and handover, covering Telford, Shrewsbury, Wellington and the rest of the county.

Seal replacement in Shropshire can be combined with any other remedials on the same inspection report. We check that each door in your Shropshire building closes and latches against its new seals before signing it off.

Wherever your building is in Shropshire, the fire safety duties come from national rules, and our installation standard is the same.

Why seals fail

Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.

The regulations behind fire doors in Shropshire

The rules that apply to fire doors in Shropshire are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Shropshire block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

What happens after you enquire

  1. Identify door certification and seal specification
  2. Remove failed seals and clean the grooves
  3. Fit new strips and seals to the specified positions
  4. Fit missing pads and lock linings
  5. Check the door closes and latches against the new seals
  6. Record the products fitted

Budgeting for intumescent strips and smoke seals in Shropshire

As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Shropshire building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Common questions

Do you provide intumescent strips and smoke seals across Shropshire?

Yes. We cover all of Shropshire, including Telford and Shrewsbury. Surveys and written quotes are free.

How long do seals last?

It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.

Do all fire doors need smoke seals?

Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.

Intumescent strips and smoke seals by town in Shropshire

Book a free survey in Shropshire

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote