Intumescent strips and smoke seals in Harrogate: what's involved
If you need intumescent strips and smoke seals in Harrogate, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Harrogate protect escape routes in high-street shops, houses with integral garages and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Seal replacement in Harrogate can be combined with any other remedials on the same inspection report. We check that each door in your Harrogate building closes and latches against its new seals before signing it off.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
On a typical job that means:
- Intumescent strips in frame or leaf edge
- Brush or blade smoke seals
- Removal of damaged or painted seals
- Identification of the specified seals
What the rules say for Harrogate
England's framework applies in Harrogate. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Harrogate, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where intumescent strips and smoke seals fit in Harrogate
From offices to care homes, the requirement for intumescent strips and smoke seals in Harrogate comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Harrogate
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Prices for intumescent strips and smoke seals in Harrogate
If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Harrogate and neighbouring towns
Harrogate is about 30.0 km from York, and we cover both, along with nearby Yeadon and Guiseley. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover HG2 and nearby postcodes?
Yes. We cover Harrogate including HG2, and nearby towns such as Yeadon and Guiseley. The survey and written quote are free.
Can you work from an existing inspection report for my Harrogate building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.