Intumescent strips and smoke seals in Redcar, done to the evidence
We provide intumescent strips and smoke seals in Redcar (TS10 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Redcar protect escape routes in schools, small blocks of flats and small offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Seal replacement in Redcar can be combined with any other remedials on the same inspection report. We check that each door in your Redcar building closes and latches against its new seals before signing it off.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
Each installation includes:
- Removal of damaged or painted seals
- Intumescent strips in frame or leaf edge
- Check of gaps and closing after fitting
- Identification of the specified seals
What the rules say for Redcar
Fire doors in Redcar fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Redcar above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Redcar need intumescent strips and smoke seals?
From offices to HMOs, the requirement for intumescent strips and smoke seals in Redcar comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Redcar
If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Redcar
Neighbouring towns such as Middlesbrough, Hartlepool, Billingham and Stockton-on-Tees are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Redcar?
Yes, we take on intumescent strips and smoke seals in Redcar and the surrounding area, including Middlesbrough and Hartlepool. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Redcar building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.