Getting intumescent strips and smoke seals right in Leeds
Looking for intumescent strips and smoke seals in Leeds? We supply and fit certified fire doors and components across Leeds and the wider West Yorkshire area, working from a free survey and a fixed written quote.
Fire doors in Leeds protect escape routes in clinics, hotels and purpose-built blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Seal replacement in Leeds can be combined with any other remedials on the same inspection report. We check that each door in your Leeds building closes and latches against its new seals before signing it off.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
On a typical job that means:
- Removal of damaged or painted seals
- Intumescent strips in frame or leaf edge
- Check of gaps and closing after fitting
- Brush or blade smoke seals
Rules and responsibilities in Leeds
Fire doors in Leeds fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Leeds above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs intumescent strips and smoke seals in Leeds?
You are most likely to need intumescent strips and smoke seals if you look after care homes, schools or blocks of flats. Whatever the building in Leeds, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Budgeting for intumescent strips and smoke seals in Leeds
Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Leeds as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Leeds
Beyond Leeds itself we also cover nearby towns such as Morley (7.1 km), Pudsey and Lofthouse. The service, pricing and evidence are the same wherever you are.
Common questions
Is Leeds within your coverage area?
It is. We cover Leeds in West Yorkshire and neighbouring towns such as Morley. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.