Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Intumescent strips and smoke seals in Glasgow

Replacing and fitting intumescent strips, smoke seals and pads to the door's certification. Available throughout Glasgow, with a free survey and fixed written quote.

Quote for Glasgow

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Intumescent strips and smoke seals for Glasgow buildings

We provide intumescent strips and smoke seals across Glasgow, covering 28 postcode districts from G1 to G69.

We check that each door in your Glasgow building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Glasgow we replace them with the type and size the certification specifies.

Wherever your building is in Glasgow, the fire safety duties come from national rules, and our installation standard is the same.

Getting the specification right

The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.

Fire door law for Glasgow properties

In Glasgow, fire doors are specified against Scotland's Technical Handbooks (Section 2: Fire) under the Building (Scotland) Regulations 2004, rather than Approved Document B. Duties in non-domestic premises come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006.

England's regulation 10 does not apply in Scotland. We follow the building's fire risk assessment and, where building work needs a warrant, the local authority's requirements.

The steps on a Glasgow installation

  1. Identify door certification and seal specification
  2. Remove failed seals and clean the grooves
  3. Fit new strips and seals to the specified positions
  4. Fit missing pads and lock linings
  5. Check the door closes and latches against the new seals
  6. Record the products fitted

Budgeting for intumescent strips and smoke seals in Glasgow

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Common questions

Do you provide intumescent strips and smoke seals across Glasgow?

Yes. We cover all of Glasgow. Surveys and written quotes are free.

How long do seals last?

It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.

Can I just add intumescent strips to an ordinary door?

No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.

Intumescent strips and smoke seals by town in Glasgow

Book a free survey in Glasgow

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote