Intumescent strips and smoke seals in Dumfries, DG1

Getting intumescent strips and smoke seals right in Dumfries

We provide intumescent strips and smoke seals in Dumfries (DG1 and the surrounding postcodes), from the first survey through to a documented handover.

Dumfries has a broad mix of buildings, including houses with integral garages, schools and family homes after loft conversions, and the same fire door principles apply to all of them.

We check that each door in your Dumfries building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Dumfries we replace them with the type and size the certification specifies.

Why seals fail

Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.

On a typical job that means:

• Identification of the specified seals
• Brush or blade smoke seals
• Intumescent pads to hinges and locks
• Intumescent strips in frame or leaf edge

The regulations behind fire doors in Dumfries

Scottish rules apply to fire doors in Dumfries. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.

Residential common parts in Dumfries are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.

Which buildings in Dumfries need intumescent strips and smoke seals?

You are most likely to need intumescent strips and smoke seals if you look after blocks of flats, care homes or HMOs. Whatever the building in Dumfries, we survey each opening and tell you which doors need work and which do not.

The steps on a Dumfries installation

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Prices for intumescent strips and smoke seals in Dumfries

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Around Dumfries

Beyond Dumfries itself we also cover nearby towns such as Carlisle (47.1 km), Workington and Whitehaven. The service, pricing and evidence are the same wherever you are.

Common questions