Fire door hold-open devices in Oadby: what's involved
If you need fire door hold-open devices in Oadby, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Oadby range from light industrial buildings to care homes and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Free-swing closers suit Oadby settings where residents or pupils find doors hard to open. Where doors in Oadby care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
As standard, the work covers:
- Electromagnetic holders to BS EN 1155
- Hold-open and free-swing closers
- Release testing with the alarm
- Assessment of door use and alarm system
Which fire door rules apply in Oadby?
The rules that apply to fire doors in Oadby are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Oadby block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Oadby need fire door hold-open devices?
From schools to clinics, the requirement for fire door hold-open devices in Oadby comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Oadby
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Oadby as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Oadby
Oadby is about 4.9 km from Leicester, and we cover both, along with nearby Wigston and Market Harborough. Send us your postcode and we'll confirm survey dates.
Common questions
Is Oadby within your coverage area?
It is. We cover Oadby in Leicestershire and neighbouring towns such as Wigston. There is no charge for the survey.
How quickly can you survey in Oadby?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.