FD30 fire doors in Oadby: what's involved
Looking for FD30 fire doors in Oadby? We supply and fit certified fire doors and components across Oadby and the wider Leicestershire area, working from a free survey and a fixed written quote.
Buildings in and around Oadby range from light industrial buildings to care homes and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For a mixed portfolio in Oadby, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Oadby is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
On a typical job that means:
- Fire-tested hinges, latch or lock and intumescent pads
- Certified FD30 or FD30S leaf, or full doorset
- Frame-to-wall gap sealed with an evidenced material
- Photo record, product data and certificate references at handover
Rules and responsibilities in Oadby
Fire doors in Oadby fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Oadby above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Oadby need FD30 fire doors?
Landlords, managing agents, facilities teams and homeowners in Oadby can all commission FD30 fire doors from us. The usual settings are schools and offices, though single doors for shops are just as welcome.
The steps on a Oadby installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Oadby
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Oadby
We also cover towns near Oadby, including Wigston (2.8 km away), Leicester and Market Harborough. If your building is in LE2 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Oadby?
Yes, we take on FD30 fire doors in Oadby and the surrounding area, including Wigston and Leicester. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Oadby?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.

