Fire door hold-open devices for Coalville buildings
If you need fire door hold-open devices in Coalville, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Coalville has a broad mix of buildings, including family homes after loft conversions, houses with integral garages and small offices, and the same fire door principles apply to all of them.
Free-swing closers suit Coalville settings where residents or pupils find doors hard to open. Where doors in Coalville care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
Each installation includes:
- Release testing with the alarm
- Hold-open and free-swing closers
- Record of devices and test results
- Coordination of alarm interface
The regulations behind fire doors in Coalville
The rules that apply to fire doors in Coalville are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Coalville block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Coalville
You are most likely to need fire door hold-open devices if you look after care homes, schools or communal corridors. Whatever the building in Coalville, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Coalville
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Coalville?
If you need a budget figure first, the guide for fire door hold-open devices is £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Coalville and neighbouring towns
Nearby towns we cover include Loughborough, Swadlincote and Leicester. Distance from Coalville does not change our guide prices, and the survey and quote are free.
Common questions
Is Coalville within your coverage area?
It is. We cover Coalville in Leicestershire and neighbouring towns such as Loughborough. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.