Getting fire door hold-open devices right in Nelson
If you need fire door hold-open devices in Nelson, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Nelson, fire door work covers everything from small blocks of flats to schools. We plan each job around the people who use the building.
Where doors in Nelson care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Nelson so every hold-open releases when it should.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
What you get:
- Hold-open and free-swing closers
- Coordination of alarm interface
- Release testing with the alarm
- Electromagnetic holders to BS EN 1155
The regulations behind fire doors in Nelson
Fire doors in Nelson fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Nelson above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door hold-open devices in Nelson?
Typical settings for fire door hold-open devices include offices, clinics and communal corridors. In Nelson, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Nelson
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Nelson
If you need a budget figure first, the guide for fire door hold-open devices is £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Nelson
Nearby towns we cover include Colne, Burnley and Accrington. Distance from Nelson does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover BB9 and nearby postcodes?
Yes. We cover Nelson including BB9, and nearby towns such as Colne and Burnley. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.