Fire door hold-open devices: our service in Leyland
If you need fire door hold-open devices in Leyland, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Leyland range from light industrial buildings to small blocks of flats and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Free-swing closers suit Leyland settings where residents or pupils find doors hard to open. Where doors in Leyland care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
What you get:
- Assessment of door use and alarm system
- Coordination of alarm interface
- Electromagnetic holders to BS EN 1155
- Record of devices and test results
What the rules say for Leyland
The rules that apply to fire doors in Leyland are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Leyland block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door hold-open devices in Leyland?
The need for fire door hold-open devices usually arises in schools or clinics, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Leyland to keep escape routes protected throughout.
From enquiry to handover in Leyland
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Leyland?
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Leyland building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Leyland
We also cover towns near Leyland, including Chorley (7.1 km away), Preston and Blackburn. If your building is in PR25 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Leyland?
Yes, we take on fire door hold-open devices in Leyland and the surrounding area, including Chorley and Preston. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Leyland?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.