What fire door hold-open devices in Colne should include
If you need fire door hold-open devices in Colne, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Colne range from small blocks of flats to houses with integral garages and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Colne care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Colne so every hold-open releases when it should.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
What you get:
- Electromagnetic holders to BS EN 1155
- Coordination of alarm interface
- Record of devices and test results
- Hold-open and free-swing closers
Fire door law for Colne properties
The rules that apply to fire doors in Colne are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Colne block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Colne
The need for fire door hold-open devices usually arises in care homes or clinics, and sometimes communal corridors. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Colne to keep escape routes protected throughout.
From enquiry to handover in Colne
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Colne?
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Colne building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Colne
Neighbouring towns such as Nelson, Burnley, Accrington and Keighley are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you work in Colne?
Yes, we take on fire door hold-open devices in Colne and the surrounding area, including Nelson and Burnley. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Colne?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.