Fire door hold-open devices in Burnley, done to the evidence
Our fire door hold-open devices service in Burnley is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Burnley has a broad mix of buildings, including GP surgeries, care homes and converted period houses, and the same fire door principles apply to all of them.
We coordinate with your fire alarm contractor in Burnley so every hold-open releases when it should. Free-swing closers suit Burnley settings where residents or pupils find doors hard to open.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
On a typical job that means:
- Electromagnetic holders to BS EN 1155
- Hold-open and free-swing closers
- Record of devices and test results
- Coordination of alarm interface
Rules and responsibilities in Burnley
The rules that apply to fire doors in Burnley are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Burnley block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where fire door hold-open devices fit in Burnley
The need for fire door hold-open devices usually arises in communal corridors or clinics, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Burnley to keep escape routes protected throughout.
How a Burnley job runs
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Burnley
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Burnley building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Burnley
Nearby towns we cover include Nelson, Colne and Accrington. Distance from Burnley does not change our guide prices, and the survey and quote are free.
Questions from Burnley
Do you work in Burnley?
Yes, we take on fire door hold-open devices in Burnley and the surrounding area, including Nelson and Colne. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Burnley building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.