Fire door hold-open devices: our service in Winchester
When you book fire door hold-open devices in Winchester, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Winchester range from small blocks of flats to family homes after loft conversions and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Free-swing closers suit Winchester settings where residents or pupils find doors hard to open. Where doors in Winchester care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Why doors get wedged
Busy corridors, care homes and schools have doors that people need open all day. If there is no safe way to hold them, they get wedged, which defeats the door completely. A hold-open device or free-swing closer solves the problem properly.
As standard, the work covers:
- Release testing with the alarm
- Record of devices and test results
- Electromagnetic holders to BS EN 1155
- Hold-open and free-swing closers
Rules and responsibilities in Winchester
Fire doors in Winchester fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Winchester above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door hold-open devices fit in Winchester
Typical settings for fire door hold-open devices include communal corridors, offices and clinics. In Winchester, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Winchester
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Prices for fire door hold-open devices in Winchester
If you need a budget figure first, the guide for fire door hold-open devices is £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Winchester
Nearby towns we cover include Eastleigh, Southampton and Totton. Distance from Winchester does not change our guide prices, and the survey and quote are free.
Questions from Winchester
Do you cover SO23 and nearby postcodes?
Yes. We cover Winchester including SO23, and nearby towns such as Eastleigh and Southampton. The survey and written quote are free.
What happens on a survey in Winchester?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.