Fire door hold-open devices for Southampton buildings
We provide fire door hold-open devices in Southampton (SO14 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Southampton protect escape routes in care homes, shared houses and student accommodation alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Free-swing closers suit Southampton settings where residents or pupils find doors hard to open. Where doors in Southampton care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
On a typical job that means:
- Assessment of door use and alarm system
- Release testing with the alarm
- Hold-open and free-swing closers
- Electromagnetic holders to BS EN 1155
Which fire door rules apply in Southampton?
England's framework applies in Southampton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Southampton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door hold-open devices in Southampton?
You are most likely to need fire door hold-open devices if you look after communal corridors, schools or offices. Whatever the building in Southampton, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Southampton?
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Southampton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Southampton and nearby
As well as Southampton, we cover neighbouring towns including Hythe, Totton and Eastleigh. The survey and quote are free.
Common questions
Do you work in Southampton?
Yes, we take on fire door hold-open devices in Southampton and the surrounding area, including Hythe and Totton. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Southampton building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.