Fire door hold-open devices in Hythe, done to the evidence
From the SO45 postcode district outwards, we take on fire door hold-open devices across Hythe for homes, blocks and workplaces.
Buildings in and around Hythe range from schools to small offices and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Hythe care homes, schools or offices are being wedged open, a hold-open device is the safe fix. Free-swing closers suit Hythe settings where residents or pupils find doors hard to open.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
As standard, the work covers:
- Hold-open and free-swing closers
- Release testing with the alarm
- Assessment of door use and alarm system
- Electromagnetic holders to BS EN 1155
What the rules say for Hythe
In Hythe, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Hythe building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Hythe
Typical settings for fire door hold-open devices include care homes, offices and clinics. In Hythe, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Hythe?
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Hythe building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Hythe
Hythe is about 4.9 km from Southampton, and we cover both, along with nearby Totton and Eastleigh. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover SO45 and nearby postcodes?
Yes. We cover Hythe including SO45, and nearby towns such as Southampton and Totton. The survey and written quote are free.
What happens on a survey in Hythe?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.

