Fire door hold-open devices in Maidenhead, done to the evidence
If you need fire door hold-open devices in Maidenhead, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Maidenhead has a broad mix of buildings, including family homes after loft conversions, high-street shops and care homes, and the same fire door principles apply to all of them.
We coordinate with your fire alarm contractor in Maidenhead so every hold-open releases when it should. Free-swing closers suit Maidenhead settings where residents or pupils find doors hard to open.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
As standard, the work covers:
- Hold-open and free-swing closers
- Coordination of alarm interface
- Release testing with the alarm
- Record of devices and test results
Rules and responsibilities in Maidenhead
The rules that apply to fire doors in Maidenhead are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Maidenhead block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Maidenhead need fire door hold-open devices?
Landlords, managing agents, facilities teams and homeowners in Maidenhead can all commission fire door hold-open devices from us. The usual settings are clinics and schools, though single doors for offices are just as welcome.
Our process in Maidenhead
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Maidenhead
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Maidenhead as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Maidenhead
We also cover towns near Maidenhead, including Slough (8.7 km away), Windsor and High Wycombe. If your building is in SL6 or a neighbouring district, the service and pricing are the same.
Common questions
Is Maidenhead within your coverage area?
It is. We cover Maidenhead in Berkshire and neighbouring towns such as Slough. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.