Fire door hold-open devices in Sandhurst, done to the evidence
From the GU47 postcode district outwards, we take on fire door hold-open devices across Sandhurst for homes, blocks and workplaces.
Buildings in and around Sandhurst range from houses with integral garages to small blocks of flats and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Sandhurst care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Sandhurst so every hold-open releases when it should.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
On a typical job that means:
- Electromagnetic holders to BS EN 1155
- Assessment of door use and alarm system
- Hold-open and free-swing closers
- Coordination of alarm interface
Which fire door rules apply in Sandhurst?
England's framework applies in Sandhurst. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Sandhurst, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Sandhurst need fire door hold-open devices?
You are most likely to need fire door hold-open devices if you look after care homes, clinics or offices. Whatever the building in Sandhurst, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Sandhurst
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Sandhurst
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Sandhurst building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Sandhurst
Nearby towns we cover include Crowthorne, Yateley and Camberley. Distance from Sandhurst does not change our guide prices, and the survey and quote are free.
Questions
Do you work in Sandhurst?
Yes, we take on fire door hold-open devices in Sandhurst and the surrounding area, including Crowthorne and Yateley. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Sandhurst?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.