Fire door hold-open devices in Bracknell, done to the evidence
When you book fire door hold-open devices in Bracknell, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Bracknell range from houses with integral garages to schools and low-rise blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Free-swing closers suit Bracknell settings where residents or pupils find doors hard to open. Where doors in Bracknell care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Working with your alarm contractor
Hard-wired hold-opens need an interface with the fire alarm, which is usually designed and certified by your fire alarm contractor. We fit and commission the door side and coordinate the interface, then test that every device releases when the alarm operates.
As standard, the work covers:
- Coordination of alarm interface
- Assessment of door use and alarm system
- Electromagnetic holders to BS EN 1155
- Release testing with the alarm
Rules and responsibilities in Bracknell
England's framework applies in Bracknell. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Bracknell, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Bracknell
Typical settings for fire door hold-open devices include schools, communal corridors and clinics. In Bracknell, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Bracknell job runs
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Bracknell
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Bracknell building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Bracknell
Nearby towns we cover include Crowthorne, Wokingham and Sandhurst. Distance from Bracknell does not change our guide prices, and the survey and quote are free.
Common questions
Is Bracknell within your coverage area?
It is. We cover Bracknell in Berkshire and neighbouring towns such as Crowthorne. There is no charge for the survey.
How quickly can you survey in Bracknell?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.