HMO fire doors for Didcot buildings
Looking for HMO fire doors in Didcot? We supply and fit certified fire doors and components across Didcot and the wider Oxfordshire area, working from a free survey and a fixed written quote.
Fire doors in Didcot protect escape routes in light industrial buildings, care homes and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
We can price an HMO in Didcot directly from the council's schedule of works and give you evidence to send back. Closers we fit in Didcot HMOs are set to close and latch without slamming, so tenants are less tempted to disconnect them.
What councils typically look for
Licensing and housing officers usually look at bedroom doors, kitchen doors and any doors onto the escape stair. Common requirements include 30-minute doors, self-closers, smoke seals and well-fitted frames. Requirements vary with the size and layout of the HMO and the local authority's approach; our HMO fire door guide sets out the typical expectations.
What you get:
- Photo record for licensing and inspections
- FD30 or FD30S doors or doorsets
- Intumescent strips and smoke seals
- Thumb-turn locks within the evidence where needed
The regulations behind fire doors in Didcot
In Didcot, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Didcot building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs HMO fire doors in Didcot?
From student lets to bedsit conversions, the requirement for HMO fire doors in Didcot comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Didcot
- Review the council's requirements or schedule of works
- Survey each door and frame
- Agree specification and tenant access
- Fit doors, seals, closers and locks
- Test every door closes and latches
- Hand over evidence for the council
Prices for HMO fire doors in Didcot
Budget around from around £350 per door in a volume HMO job, up to £900 where frames are replaced, ex VAT for HMO fire doors. Our guide prices are the same in Didcot as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Didcot and neighbouring towns
Neighbouring towns such as Abingdon, Oxford, Thatcham and Newbury are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Didcot
Do you work in Didcot?
Yes, we take on HMO fire doors in Didcot and the surrounding area, including Abingdon and Oxford. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Didcot building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do all doors in an HMO need to be fire doors?
Not always. Bedroom, kitchen and stair doors are the usual focus. The council's requirements depend on the HMO's size, storeys and layout.
Can you work to a council schedule of works?
Yes. Send us the schedule and we will price each item, carry out the work and give you evidence to send back.