FD30 fire doors in Didcot

Getting FD30 fire doors right in Didcot

If you need FD30 fire doors in Didcot, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Buildings in and around Didcot range from small blocks of flats to small offices and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

For a mixed portfolio in Didcot, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Didcot is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Overhead closer set to close and latch
• Survey of the opening, frame and existing ironmongery
• Certified FD30 or FD30S leaf, or full doorset
• Frame-to-wall gap sealed with an evidenced material

Rules and responsibilities in Didcot

In Didcot, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Didcot building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Who needs FD30 fire doors in Didcot?

The need for FD30 fire doors usually arises in care homes or HMOs, and sometimes schools. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Didcot to keep escape routes protected throughout.

From enquiry to handover in Didcot

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Didcot

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Didcot building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Covering Didcot and nearby

Didcot is about 15.9 km from Oxford, and we cover both, along with nearby Abingdon and Thatcham. Send us your postcode and we'll confirm survey dates.

Questions