Fire door closers in Didcot: what's involved
We provide fire door closers in Didcot (OX11 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Didcot, fire door work covers everything from family homes after loft conversions to small offices. We plan each job around the people who use the building.
We set closers in Didcot buildings so doors close fully without becoming too heavy to open. Free-swing closers are a practical option for Didcot care homes and supported living.
The most common fire door fault
A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.
As standard, the work covers:
- Record of model and settings
- Close-and-latch test from full open
- Assessment of door size, weight and use
- Correctly powered closer to BS EN 1154
Which fire door rules apply in Didcot?
England's framework applies in Didcot. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Didcot, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where fire door closers fit in Didcot
You are most likely to need fire door closers if you look after HMOs, schools or blocks of flats. Whatever the building in Didcot, we survey each opening and tell you which doors need work and which do not.
How a Didcot job runs
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Guide prices in Didcot
Budget around £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT for fire door closers. Our guide prices are the same in Didcot as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Didcot
Didcot is about 15.9 km from Oxford, and we cover both, along with nearby Abingdon and Thatcham. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Didcot?
Yes, we take on fire door closers in Didcot and the surrounding area, including Abingdon and Oxford. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Didcot building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
What is a free-swing closer?
A closer that lets the door swing freely in normal use and closes it when the fire alarm operates. It suits care settings and people who find doors heavy.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.